T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
2. Remove pistons from cylinder.
(a) Prepare the wooden plate to hold the pistons.
(b) Place the plate between the pistons and insert a pad at one side.
(c) Use compressed air to remove the pistons alternately from the cylinder.
WARNING: Do not place your fingers in front of the piston when using compressed air.
Remove Piston Seals
3. Remove piston seals.
Using a screwdriver, remove the 4 piston seals from the cylinder.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
NOTE: Apply lithium soap base glycol grease to the parts indicated by arrows in EXPLODED VIEW.