toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5210 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5208
Page 2
background image

Torque: 19 Nm (14 ft. lbs.)

3. Remove ABS actuator.

(a) Remove the 3 nuts and ABS actuator from the actuator bracket.

Torque: 5.4 Nm (48 inch lbs.)

(b) Remove the 3 holders and cushions from the ABS actuator.

INSTALLATION

Installation is in the reverse order of removal.
After installation, fill brake reservoir with brake fluid, bleed brake system. See: Brake Bleeding/Service and Repair
Check for leaks.

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5210 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 5208