T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
/Page-488005.png)
(a)
Using SST Variable Pin Wrench Set # 09960 - 10010 (Variable Pin Wrench Arm Assembly # 09962 - 01000, Pin 10 # 09963 - 01000) or
equivalents, loosen the pulley bolt.
(b) Remove the bolt, knock pin and camshaft timing pulley with timing belt.
16. Remove LH camshaft timing pulley.
(a)
Using SST Variable Pin Wrench Set # 09960 - 10010 (Variable Pin Wrench Arm Assembly # 09962 - 01000, Pin 10 # 09963 - 01000) or
equivalents, loosen the pulley bolt.
(b) Remove the bolt, knock pin and camshaft timing pulley.
17. Remove crankshaft pulley.
(a)
Using Special Service Tool (SST) Crankshaft Pulley Holding Tool # 09213 - 54015 (Bolt 90119 - 08216) and Companion Flange Holding
Tool # 09330 - 00021 or equivalents, loosen the pulley bolt.
(b) Remove the SST, pulley bolt and pulley.
