T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
Wheel Fastener: Service and Repair
Front
REPLACEMENT
1. Remove the hub bolt, as follows:
a. Place matchmarks on the disc and axle hub.
b. Remove the six bolts, washers and separate the disc and axle hub.
c. Install the nut to the axle hub bolt.
d. Using an extension bar and press, remove the hub bolt.
2. Install the hub bolt, as follows:
a. Using an extension bar and press, install the hub bolt.
b. Align the matchmarks and install the axle hub to the disc with the six washers and bolts.
Torque: 64 Nm (47 ft. lbs.).