T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
4. Install cam ring. Install the ring with the inscribed mark facing outward.
5. Install vane pump rotor, as follows:
a. Install the rotor with the inscribed mark facing outward.
b. Install a new snap ring to the vane pump shaft.
6. Install vane plates. Install the ten plates with the round end facing outward.
7. Install gasket. Install a new gasket on the front housing.
NOTICE: Be careful the direction of the gasket.
8. Install side plate. Align the two straight pins and holes of the plate.