T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1709003.png)
c. Remove the nut, washer and bushings.
d. Remove the two shackle pin mounting nuts and washers.
Torque: 91 Nm (67 ft. lbs.).
INSTALLATION NOTE: After stabilizing the suspension, tighten the nut.
e. Remove the shackle pin, plate and bushings, and remove the rear leaf spring.
BUSHING REPLACEMENT
Replace the bushing. Using a socket wrench and press, replace the bushing.
INSTALLATION
Installation is in the reverse order of removal.
