T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1313001.png)
Clutch Slave Cylinder: Service and Repair
Replacement
REMOVAL
1. Disconnect clutch line.
Using Special Service Tool (SST) 09023-00100 or equivalent, disconnect the line. Use a container to catch the fluid.
Torque: 15 N.m (11 ft. lbs.).
2. Remove two bolts and pull out release cylinder.
Torque: 13 N.m (108 inch lbs.).
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, bleed clutch system.
