T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
/Page-1333003.png)
c. Using SST 09330 - 00021 or equivalent to hold the flange, torque the nut.
Torque: 108 Nm (80 ft. lbs.).
9. Adjust drive pinion preload.
10. Stake drive pinion nut.
11. Install front propeller shaft.
12. Fill the differential with Hypoid gear oil API GL-5 differential oil, recommended oil viscosity type SAE 75W-90 to a capacity of 1.86 liters (1.97
US qts.), then tighten the filler plug to 39 Nm (29 ft. lbs.).
13. Install engine under cover.
