T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
1. Inspect the bearings, taking care to clean the bearings and outer races and inspect them for wear or damage.
2. Replace the bearing outer race, as follows:
a. Using a brass bar and hammer, remove the bearing outer race.
NOTICE: Be careful not to damage the ABS speed sensor rotor.
b. Using Special Service Tool (SST) 09950 - 60020 (09951 - 00720), 09950 - 70010 (09951 - 07100) or equivalents for the outside race and
SST 09950 - 60020 (09951 - 00810), 09950 - 70010 (09951 - 07150) or equivalents for the inside race, and a hammer, carefully install a new
bearing outer race.
NOTE: Be careful not to damage the ABS speed sensor rotor.