T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-144003.png)
-
Assemble the holder and grommet.
HINT: Connect the high-tension cords to the distributor cap as shown in the above image.
NOTICE: Check that the holder is correctly installed to the grommet and distributor cap as shown in the above image.
-
Check that the lock claw of the holder is engaged by lightly pulling the holder.
8. RECONNECT HIGH-TENSION CORDS TO SPARK PLUGS.
Secure the high-tension cords with the clamps as shown in the
above image.
9. WITH A/C: REINSTALL A/C IDLE-UP VALVE.
10. REINSTALL INTAKE AIR CONNECTOR.
11. REINSTALL AIR CLEANER CAP AND MAF METER ASSEMBLY.
