T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
NOTICE: Pulling on or bending the cords may damage the conductor inside.
5. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP.
-
Using a screwdriver, lift up the lock claw and disconnect the holder from the distributor cap.
-
Disconnect the high-tension cord at the grommet. DO NOT pull on the cord.
NOTICE:
-
Pulling on or bending the cords may damage the conductor inside.
-
Do not wipe any of the oil from the grommet after the high-tension cord is disconnected.
6. RECONNECT HIGH-TENSION CORDS TO DISTRIBUTOR CAP.
-
Assemble the holder and grommet.
HINT: Connect the high-tension cords to the distributor cap as shown in the above image.