T100 Pickup 2WD L4-1644 2693cc 27L DOHC (3RZ-FE) Ignition Cable Diagrams
NOTICE: Check that the holder is correctly installed to the grommet and distributor cap as shown in the above image.
-
Check that the lock claw of the holder is engaged by lightly pulling the holder.
7. RECONNECT HIGH-TENSION CORDS TO SPARK PLUGS.
Secure the high-tension cords with the clamps as shown in the
above image.
8. WITH A/C: REINSTALL A/C IDLE-UP VALVE.
9. REINSTALL INTAKE AIR CONNECTOR.
10. REINSTALL AIR CLEANER CAP AND MAF METER ASSEMBLY.