T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
Crankshaft Position Sensor (NE Signal): Testing and Inspection
NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensor itself. Cold is from -10°C (14°F) to 50°C (104°F)
and Hot Is from 50°C (104°F) to 100°C (212°F).
1. REMOVE CRANKSHAFT POSITION SENSOR.
2. INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE.
-
Using an ohmmeter, measure the resistance between terminals.
-
Resistance:
Cold NE (+) and NE (-): 1,630 - 2,740 Ohms.
Hot NE (+) and NE (-): 2,065 - 3,225 Ohms.
-
If the resistance is not as specified, replace the crankshaft position sensor.
3. REINSTALL CRANKSHAFT POSITION SENSOR.