T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
Knock Sensor: Testing and Inspection
1. REMOVE KNOCK SENSOR.
-
Disconnect the knock sensor connector.
-
Using SST 09816-30010 or equivalent, remove the knock sensor.
2. INSPECT KNOCK SENSOR.
-
Using an ohmmeter, check that there is no continuity between the terminal and body.
-
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR.
-
Using SST, install the knock sensor.
Torque: 44 Nm (33 ft lb)
-
Connect the knock sensor connector.