T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-642002.png)
-
If the air gap is not as specified, replace the distributor housing assembly.
8. INSPECT SIGNAL GENERATOR (PICKUP COIL) RESISTANCE
-
Using an ohmmeter, measure the resistance between the terminals.
-
Pickup coil resistance:
Cold: G (+) and G (-): 185 - 275 Ohms
Hot: G (+) and G (-): 240 - 325 Ohms
-
If the resistance is not as specified, replace the distributor housing assembly.
9. REINSTALL IGNITION COIL DUST COVER
10. REINSTALL ROTOR
11. REINSTALL DISTRIBUTOR CAP
12. RECONNECT DISTRIBUTOR CONNECTOR
