T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
Ignition Coil: Service and Repair
ASSEMBLY NOTICE: Assembly is in the reverse order of disassembly.
1. REMOVE ROTOR.
2. REMOVE IGNITION COIL DUST COVER.
-
Remove the dust cover.
-
Remove the dust proof packing.
ASSEMBLY HINT: Use new dust proof packing.
3. REMOVE IGNITION COIL.
-
Remove the 2 nuts, and disconnect the 3 wires from the ignition coil terminals.
ASSEMBLY NOTICE:
-
When connecting the wires to the ignition coil, insert the wire properly into the groove on the side of the ignition coil.
-
Be sure the wires do not contact with signal rotor or distributor housing.
-
Remove the 4 screws and ignition coil.