T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-348001.png)
Throttle Position Sensor: Adjustments
1. Loosen the 2 set screws of the TP sensor.
-
Apply vacuum to the throttle opener.
-
Insert a 0.62 mm (0.024 in.) feeler gauge between the throttle stop screw and stop lever.
-
Connect the test probe of an ohmmeter to the terminals IDL and E2 of the TP sensor.
-
Gradually turn the TP sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws.
-
Recheck the continuity between terminals IDL and E2.
