T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-399001.png)
Distributor: Service and Repair
Removal
1. DISCONNECT DISTRIBUTOR CONNECTOR.
2. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP.
(See Ignition Cable - Service and Repair)
3. SET NO.1 CYLINDER TO TDC/COMPRESSION.
-
Turn the crankshaft pulley clockwise until the timing mark is aligned with "0" mark on the oil pump cover.
-
Remove the 3 bolts and distributor cap.
