T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
/Page-889001.png)
Steering Gear: Service and Repair
Removal and Installation
1.
Mark relative position between coupling and worm shaft, then remove coupling attaching bolt.
2.
Loosen pitman arm mount nut, then disconnect relay rod from pitman arm, using tool No. 09611-22012 or equivalent.
3.
Remove gear housing attaching bolts, then the gear housing.
4.
Reverse procedure to install.
