T100 Pickup 2WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1995)
15. With ABS, install ABS speed sensor rotor and bearing retainer (differential side). Using SST 09316 - 60011 (09316 - 00051) or equivalents, and a
press, install a new sensor rotor and a new bearing retainer to the axle shaft.
Standard length: 122.2 +/- 1 mm (4.811 +/- 0.039 inch).
Hub Bolt Replacement
REPLACEMENT
1. Remove wheel and brake drum.
2. Remove hub bolt. Using Special Service Tool (SST) 09650-17011 or equivalent, remove the hub bolt.
3. Install hub bolt. Hold the axle shaft, using plate washer and nut, install a new hub bolt.
4. Install brake drum and wheel.
Torque: 103 Nm (76 ft. lbs.).