T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
9. Align the installation mark on the timing belt with the dot mark of the crank timing pulley.
10. Install the timing belt on the crank timing pulley and water pump pulley.
11. Install the belt guide, facing the cup side outward as shown.
12. With the gasket installed to the cover, install the No.1 timing belt cover using the three bolts as shown.
13. Align the pulley set key with the key groove of the crank pulley and temporarily install the pulley bolt.
14. Using SST #'s 09213-58012 (90201-08131, 91111-50845) and 09330-00021, torque the pulley bolt to 245 Nm (181 ft.lbs).
15. Install the P/S drive belt pulley with the four mount bolts.