T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-818001.png)
Fuel Pressure Regulator: Service and Repair
Assembly
INSTALLATION
1. Install Fuel Pressure Regulator.
^
Fully loosen the lock nut of the Fuel Pressure Regulator.
^
Apply a light coat of gasoline to a new O-ring and install it to the Fuel Pressure Regulator.
^
Thrust the Fuel Pressure Regulator completely into the delivery pipe by hand.
^
Turn the Fuel Pressure Regulator counterclockwise until the outlet faces in the direction indicated in the illustration.
^
Torque the lock nut.
Torque: 29 Nm (22 ft lb).
2. Install air intake chamber.
^
Position a new gasket on the intake manifold.
^
Install the intake chamber with the 6 bolts and 2 nuts.
Torque: 18 Nm (13 ft lb).
