toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

On-Vehicle Inspection|Page 2901 > < On-Vehicle Inspection|Page 2899
Page 5
background image

1. Check the engine speed by fully screwing in the idle speed adjusting screw.

At low temperature.
^

Engine coolant temperature below 80°C (176°F): When the idle speed adjusting screw is in, the engine speed should drop.

After warm-up
^

When the idle speed adjusting screw is in, the engine speed should drop below idle speed stop.

On-Vehicle Inspection|Page 2901 > < On-Vehicle Inspection|Page 2899