toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Position Sensor|Specifications|Page 2915 > < Throttle Cable/Linkage|Description and Operation|Page 2911
Page 1
background image

Throttle Position Sensor: Specifications

RESISTANCE

Between terminals VTA - E2

With 0 clearance at throttle stop screw .......................................................................................................................................................  0.47 - 6.1 k ohms

Between terminals IDL - E2

With 0.50 mm (0.020 in) clearance at stop screw ......................................................................................................................................  2.3 k ohms or less

Between terminals IDL - E2

With 0.80 mm (0.031 in) clearance at stop screw .......................................................................................................................................................  infinity

Between terminals VTA - E2

With throttle valve fully open .....................................................................................................................................................................  3.1 - 12.1 k ohms

Between terminals VC - E2

Always ..........................................................................................................................................................................................................  3.9 - 9.0 k ohms

Throttle Position Sensor|Specifications|Page 2915 > < Throttle Cable/Linkage|Description and Operation|Page 2911