T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
Vehicle Speed Sensor: Testing and Inspection
Vehicle Speed Sensor Inspection
INSPECTION
1. Connect the positive (+) lead from battery to terminal 1 and negative (-) lead to terminal 2 as shown.
2. Connect the positive (+) lead from tester to terminal 3 and negative (-) lead to terminal 2 as shown
3. Revolve shaft.
4. Check that there is a voltage change from approx. 0.0 volts to 11.0 volts or more between terminals 3 and 2.
NOTE: The voltage should change 4 times per each revolution of the Speed Sensor shaft.
If operation is not as specified, replace the Sensor.