T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
^
Assemble the holder and grommet.
^
Align the spline of the Distributor (Ignition Coil) with the spline of the holder. and push in the cord.
NOTE: Check that the holder is correctly installed to the grommet and Distributor Cap as shown in the illustration.
^
Check that the lock claw of the holder is engaged by lightly pulling the holder.
5. Reconnect High-tension Cords to Spark Plugs.