T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
/Page-1216002.png)
4.
Apply grease P/N 08887-80219 in the following locations:
^
Thrust bushing inner bore and frontal surface.
^
Oil seal.
^
Drive shaft where contact will be made.
Note:
One tube of grease is sufficient for both left and right side axles.
5.
Reassemble the knuckle and driveshaft assembly. Use care when installing shaft to prevent damage to needle roller bearing.
PART NUMBER INFORMATION: