T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
Front Steering Knuckle: All Technical Service Bulletins
Steering - Spindle Bushing Noise When Cold
REF.: DRIVELINE/DIFFERENTIAL
NO.: DL94-001
DATE: OCTOBER 14, 1994
MODEL: 4X4 - TRUCK, 4RUNNER, T100
4X4 FRONT AXLE BEARING REPLACEMENT
To reduce front spindle bushing noise which may be experienced during severe cold ambient temperatures, a new needle roller bearing and thrust
bushing have been made available for use in place of the original bushing.
Note:
This repair is applicable only to 4X4 vehicles produced after 8/89.
INSTALLATION PROCEDURE:
1.
Remove front axle bushings (refer to applicable service manual section).
2.
Install needle roller bearing using SST # 09620-30010, tool # 5 or equivalent bearing driver.
3.
Install thrust bushing using appropriate bushing driver/installer.