T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
Torsion Bar: Service and Repair
Fig. 9 Exploded View Of Front Suspension Components.
Fig. 10 Removal & Installation Of Torsion Bar Spring
1.
Remove boots, then mark relative position between torsion bar, anchor arm and torque arm, Fig. 9.
2.
Measure protruding bolt end dimension ``A,'' Fig. 10.
3.
Loosen adjusting nut, then remove anchor arm and torsion bar. At rear end of torsion bar there are right and left indication marks that are
not to be interchanged.
4.
Apply a suitable lubricant to torsion bar spline.
5.
Align matchmarks made during removal.