T100 Pickup 4WD V6-3.4L (5VZ-FE) (1995)
/Page-641001.png)
Camshaft Position Sensor: Service and Repair
Installation is in the reverse order of removal.
1. REMOVE UPPER RADIATOR HOSE.
2. REMOVE NO.2 TIMING BELT COVER.
-
Remove the high-tension cord clamps from the No.2 timing belt cover.
-
Remove the PS pump hose from the No.2 timing belt cover clamp.
-
Remove the 6 bolts and No.2 timing belt cover.
3. REMOVE CAMSHAFT POSITION SENSOR.
-
Disconnect the camshaft position sensor connector.
-
Remove the bolts and camshaft position sensor.
-
Torque: 7.8 Nm (69 in lb)
