T100 Regular Cab Pickup 2WD L4-2693cc 2.7L DOHC MFI (1998)
a. When pulling down the load sensing spring, check that the valve piston moves down smoothly.
b. Position the valve body so that the valve piston lightly contacts with the load sensing spring.
c. Tighten the valve body mounting nuts.
Torque: 13 Nm (9 ft. lbs.)
6. Bleed brake line.
7. Check and adjust LSP & BV fluid pressure.
8. Apply sealant to shackle No.2.
Apply sealant to the top portion of the shackle No.2 bolt threads not to lose the upper lock nut.
Sealant: THREE BOND 1324 or equivalent
