T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect level warning switch connector.
2. Take out fluid with syringe.
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
3. Disconnect brake lines.
Using Special Service Tool (SST) 09751-36011 or equivalent, disconnect the brake lines from the master cylinder and 3-way union.
4. Remove master cylinder.
Master Cylinder Removal (Part 3 Of 3)