toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6652 > < Diagram Information and Instructions|Page 6650
Page 1
background image

Clock: Testing and Inspection

HINT:  Troubleshoot the clock according to the table.

Problem 

No.

Clock will not operate

1

Clock loses or gains time

2

± 1.5 seconds / day

PROBLEM NO:1

CLOCK WILL NOT OPERATE

a. Check that the battery positive voltage is 10 - 16 V.

If voltage is not as specified, replace the battery.

b. Check that the DOME fuse is not blown.

If the fuse is blown, replace the fuse and check for short circuit.

c. Troubleshoot the clock as follows.

HINT:  Inspect the connector on the wire harness side.

PROBLEM NO:2

Diagram Information and Instructions|Page 6652 > < Diagram Information and Instructions|Page 6650