toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Position Sensor > < Diagram Information and Instructions|Page 2733
Page 1
background image

Power Steering Pressure Switch: Testing and Inspection

INSPECTION 

1. TURN AIR CONDITIONING SWITCH OFF.

2. CHECK IDLE-UP.

a. Start the engine and run it at idle.
b. Fully turn the steering wheel.
c. Check that the engine rpm decreases when the vacuum hose is pinched.
d. Check that the engine rpm increases when the hose is released.

 

Throttle Position Sensor > < Diagram Information and Instructions|Page 2733