T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
/Page-869001.png)
Camshaft Position Sensor: Testing and Inspection
INSPECTION
INSPECTION CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connectors.
(b) Inspect the camshaft position sensor resistance. Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 835- 1 ,400 ohms
Hot: 1,060-1,645 ohms
If the resistance is not as specified, replace the camshaft position sensor.
(c) Reconnect the camshaft position sensor connector.
