T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
/Page-551001.png)
Vehicle Speed Sensor: Service and Repair
VEHICLE SPEED SENSOR NO.1 REPLACEMENT
To replace vehicle speed sensor no.1 the instument cluster must be removed SEE:Instrument Cluster/CarrierSee: Instrument Panel, Gauges and Warning
Indicators/Instrument Cluster / Carrier
VEHICLE SPEED SENSOR NO.2 REPLACEMENT
ON-VEHICLE REPAIR
1. DISCONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.2 VEHICLE SPEED SENSOR
a. A340E: Remove the bolt and No.2 vehicle speed sensor.
b. A340F: Remove the bolt and No.2 vehicle speed sensor.
c. Remove the O-ring from it.
3. INSTALL NO.2 VEHICLE SPEED SENSOR
a. Coat a new O-ring with Automatic Transmission Fluid (ATF) and install it to the vehicle speed sensor.
b. Install the speed sensor and torque the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
4. CONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR
