T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
Impact Sensor: Testing and Inspection
INSPECTION
1. VEHICLES NOT INVOLVED IN A COLLISION
Do a diagnostic system check.
2. VEHICLES INVOLVED IN A COLLISION
a. Do a diagnostic system check.
b. If the front fender of the car or its periphery is damaged, do a visually check for damage to the front airbag sensor, which includes the
following items even if the airbag was not deployed:
^
Bracket deformation
^
Peeling of paint off the bracket
^
Cracks, dents or chips in the case
^
Cracks, dents, chipping and scratches the connector
^
Peeling of the label or damage to the series number
REPLACEMENT REQUIREMENT
In the following cases, replace the front airbag sensor.
^
If the SRS has been deployed in a collision. (Replace both the left and right airbag sensors.)
^
If the front airbag sensor has been found to be faulty in troubleshooting.
^
If the front airbag sensor has been found to be faulty during the check in item.
^
If the front airbag sensor has been dropped.