T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
/Page-148001.png)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. 4WD:
REMOVE ENGINE UNDER COVER
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
(b) Remove the bolt crankshaft position sensor.
Torque:7.8 N.m (80 kgf.cm, 69 in.lbf)
INSTALLATION
Installation is in the reverse order of removal.
