T100 SR5 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1998)
/Page-1147004.png)
2. INSPECT SPIDER BEARING
a. Inspect the spider bearing for wear or damage.
b. Using a dial indicator, check the spider bearing axial play by turning the yoke of flange while holding the shaft tightly.
Bearing axial play: 0.05 mm (0.0020 inch)
3. INSPECT CENTER SUPPORT BEARING FOR WEAR OR DAMAGE
Check that the bearing turns freely.
If the bearing is damaged, worn, or does not turn freely, replace it.
HINT: When replacing the rear propeller shaft spider, be sure that the grease fitting assembly hole is facing in the direction shown in the
illustration.
4. INSPECT WITH DOUBLE CARDAN JOINT PROPELLER SHAFT
a. Inspect the shaft for wear or damage.
b. Inspect the double cardan joint for wear damage.
If any problem is found, replace the propeller shaft assembly.
HINT: Double cardan joint is used on front and rear propeller shafts.
REASSEMBLY
