Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
1. Remove engine under cover.
2. Drain engine oil.
3. Remove drive belt for generator, fan with fluid coupling and water pump pulley.
4. Remove cylinder head assembly.
5. w/ A/C: Disconnect A/C compressor and bracket.
(a)
Remove the 4 bolts, and disconnect the compressor from the bracket.
NOTE: Put aside the compressor, and suspend it.
(b) Remove the 4 bolts and A/C compressor bracket.
6. Remove generator, adjusting bar and bracket.
(a)
Disconnect the generator connector.