Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
(b) Remove the nut, and disconnect the generator wire and wire clip.
(c)
Remove the lock, pivot bolts and the generator.
(d) Remove the bolt and adjusting bar.
(e)
Remove the 3 bolts and generator bracket.
7. Remove crankshaft position sensor.
(a)
Remove the 2 bolts and crankshaft position sensor.
(b) Remove the O-ring from the crankshaft position sensor.
8. Remove stiffener plates.
Remove the 8 bolts and stiffener plates.
9. Remove flywheel housing under cover and dust seal.
10. Remove oil pan.
(a)
Remove the 16 bolts and 2 nuts.