Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
Front Steering Knuckle: Service and Repair
HUB BOLT REPLACEMENT
1. Remove hub bolt.
a. Place matchmarks on the disc and axle hub.
b. Remove the 5 bolts and separate the disc and axle hub.
c. Install the nut to the hub bolt.
d. Using a brass bar and a press, remove the hub bolt.
2. Install hub bolt.
a. Using a brass bar and a press, install the hub bolt.
b. Align the matchmarks and install the axle hub to the disc with the 5 bolts.
Torque to 64 Nm (47 ft. lbs.)