Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
/Page-1303009.png)
b. Using a spanner to hold the steering rack steady, and using SST 09922-10010, remove the rack end.
NOTICE:
^
Use SST 09922-10010 in the direction shown in the illustration.
^
Mark the RH and LH rack ends.
6. Remove rack housing No. 2 bracket and grommet.
a. Place matchmarks on the bracket and rack housing.
b. Remove the bolt.
7. Remove rack guide spring cap lock nut. Using SST 09922-10010, remove the nut.
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
8. Remove rack guide spring cap. Using a 24 mm hexagon wrench, remove the cap.
9. Remove rack guide spring, rack guide and rack guide seat. Remove the seat from the guide.
10. Remove dust cover.
11. Remove control valve housing with control valve assembly.
a. Place matchmarks on the valve housing and rack housing.
b. Remove the 2 bolts.
c. Pull out the control valve assembly with the valve housing.
d. Remove the O-ring from the rack housing.
