Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
(e) Using SST and a press, remove the other bushing. SST 09710-30021 (09710-03071, 09710-03141)
3. INSTALL NEW BUSHINGS
(a) Using SST and a press, install a new bushing. SSTO971O-30021 (09710-03101)
(b) Place the arm shaft to the bushing.
(c) Using SST and a press, install a new other bushing. SSTO971O-30021 (09710-03101)
HINT: Pass the arm shaft through the bushing.
(d) Check that the arm shaft turns easily, and check that there is no axial play in the arm shaft.
4. INSTALL LOCK BOLTS
Position the arm shaft so that the frame installation surface is at 90° to the suspension arm as shown, and torque the lock bolts.
Torque: 125 N.m (1.270 kgf.cm. 92 ft.lbf)
UPPER SUSPENSION ARM INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, ABS speed sensor signal and front wheel alignment.