Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
a. Drill off the head of the rivet and drive it out.
b. Install a new rivet into the holes of the spring leaf and clip. Then rivet with a press.
4. Install spring center bolt.
a. Align the leaf holes and secure the leaves with a vise.
b. Install the spring center bolt.
Installation Hint: Torque to 44 Nm (33 ft. lbs.)
5. Bend spring clip. Using a hammer, bend the spring clip into the position.
INSTALLATION
Installation is in the reverse order of removal.