toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Disassemble|Page 3581 > < Disassemble|Page 3579
Page 5
background image

b. Install the four check balls. 

Check ball:

Rubber ball diameter: 5.5 mm (0.217 inch).

c. Place a new No.3 and No.4 gaskets and plate on the lower valve body.

NOTE:  Since No.3 gasket and No.4 gasket look similar, use the illustrations to differentiate between them.

d. Install the lower valve body cover.
e. Install and tighten the eight bolts.

Disassemble|Page 3581 > < Disassemble|Page 3579