Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
Standard backlash: 0.05 - 0.20 mm (0.0020 - 0.0079 inch)
If the backlash is not within the specification, install the correct thrust washers.
7. Check tooth contact between ring gear and drive pinion.
Standard backlash: 0.05 - 0.20 mm (0.0020 - 0.0079 inch)
If the backlash is not within the specification, install the correct thrust washers.
7. Check tooth contact between ring gear and drive pinion.