Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
Counter Gear: Service and Repair
Disassembly
Remove No.3 hub sleeve, shifting key an spring from synchronizer ring.
a. Remove the synchronizer ring assembly from the No.3 hub sleeve.
b. Turn the reverse synchronizer pull ring.
c. Remove the reverse synchronizer ring and 5th synchronizer ring from the synchronizer pull ring and cone ring.
d. Turn the reverse synchronizer pull ring and separate the pull ring and cone ring.
e. Remove the 3 shifting keys and key springs by care-fully levering up the shifting key spring with one screwdriver and levering the shifting key
away from the reverse synchronizer ring with another screwdriver.