Tacoma 2WD L4-2.4L (2RZ-FE) (1996)
Seals and Gaskets: Service and Repair
If necessary, replace extension housing oil seal.
a. Using SST 09308-00010 or 09308-10010 w/output shaft installed, remove the oil seal.
b. Using SST 09950-60010 (09951-00560), 09950-70010 (09951-07150) and a hammer, drive in a new oil seal.
Drive in depth: 0 ±0.5 mm (0 ±0.020 inch)