Tacoma 2WD L4-2.7L (2TR-FE) (2005)
9. Insert the floor retainer lower piece under the original hole of the carpet.
Confirm that the floor retainer lower is facing the correct direction.
10. Attach the new floor retainer upper onto the floor retainer lower by pressing the 2 pieces together until a "click" is heard.
Confirm that the floor retainer upper is facing the correct direction.
11. Repeat steps for other damaged floor retainers, if necessary.
12. Lay carpet back down to its original location.
13. Reinstall cowl side trim, wire harnesses, trunk release lever and drivers side scuff plate.